The major factor was rank on JEE, as I got around 90k in JEE mains which is not a very good rank. I was getting North eastern NIT so after comparing it with NIFFT, I found out that it is much more affordable, accessible and good as compared to them ( in terms of core branch ) . Also I checked the fee structure, ROI, Campus placement, Campus life and it was decent if you want to spend a good college life along with a job after 4 years ( specially in metallurgy). There are few demerits like small campus, less exposure etc but it is manageable as it produces good rankers in GATE and CAT.

I choose this college because i found it better that other colleges that i was getting at my rank. Admissions are based on All INDIA RANK in JEE MAINS . and counseling is done by JoSAA and CSAB ONLY. Physical Reporting at college is very very SIMPLE it takes hardly 2 hours for admission prosses.

To get admission in this college you have to clear jee mains! There were no interviews or something! You have to prepare for jee mains get a decent rank and you could get a chance to study mme or me from one of the best core engineering college in India!

Campus is too small but campus is beautiful and well organised campus if you want to this college the you appear in joint interance examination test and at that time cutoff is going very low and NIRF ranking is also getting low if you are female and your rank is 11L , SC/ST cutoff goes to around 8L in this year but at my time this college is closed at around 2.5 L and in past 2-3 years no. Of students is also increased

I like the course curriculum. Especially this college is for the core branch so I like this college. Also, placement is very good at this college. Every year almost all the students got placed. Vedanta, Tata Steel, and JSW Steel are the top companies that come regular year for campus placement.

Admission via JEE Mains and further JOSSA Counselling.. Pretty Small campus equipped with all Labs and other Practical aspects Prepared for JEE Mains and got the seat via JOSSA Round Don’t expect a lot of MNC for placement is a major setback

This college is quite good in Metallurgy and Materials Engineering and I have interest in metal and Materials since childhood so I have given jee mains and got 88 percentile so in counseling I got this college.

I joined this college in the year 2022 through JEE MAINS rank and no GD and PI are required to join my college. The admission process is quite simple just after getting JEE MAINS RANK go for counselling through 6 rounds of JOSAA counselling and 2 rounds of CSAB counselling. The cut-off for general category students is around the 95 percentile for general category students. The good thing about our college is that the fee is very low and good faculties who will help you get an internship easily and are industry-friendly. The bad thing is no regular event is organised for us students.

I selected this college because I had a low rank and wanted a computer science degree but it was a fusion of computer science with manufacturing technology also I heard a lot about this college on YouTube the internet and other reviews on Quora and it was an old college setup in 1966 so it has. A good alumni base

This college takes admissions based on JEE ( mains ) score and percentile. The college average cut-off is nearly 85 percentile it will vary year by year. you get this college through the JOSAA counseling. The good aspect is It is one of the oldest and only colleges which are dedicated to manufacturing, Its placement records very impressive, the college's average package is 9 LPA, and the highest package approx 15 LPA, the college has a 100% placement record, It now comes under deemed university, good college life, and less academic pressure, the college has experienced faculty, ragging free environment and good senior - junior relation, well known for CAT exam s.